Large sv

Liquitex Medium Varnish Satin 237ml / 8oz

£19.90

Out of stock

PRODUCT DETAILS


Seal your acrylic work with a transparent, satin acrylic layer which is breathable, permanent and protects against UV damage.

What it does

100% acrylic polymer varnish adds a satin sheen, protects and resists dirt retention
Dries clear to a flexible, non-tacky, hard surface
Increases brightness and colour saturation
Adjusts and unifies surface sheen
Improves surface durability - ideal when shipping or exhibiting
Protects colours from UV light damage
Resists discoloration - yellowing and fogging - caused by humidity, heat and UV
Depending on the substrate it allows surface moisture to pass through and breathe
Allows for easy cleaning without fear of damaging the acrylic paint film
Has excellent levelling properties - will not hold brush marks
Semi-opaque when wet, transparent when dry
Use on flexible or rigid supports
Designed for interior and exterior use

How to use it

As this is permanent, do a patch test first
Before varnishing ensure paint surface is fully dry (72 hours-two weeks depending on thickness)
Ensure your space is well ventilated and dirt and dust-free
Place the artwork flat on a surface - always varnish horizontally
Stir gently before use
Use long, even strokes, covering the surface top to bottom while moving from one side to the other - don't go over bits you have missed, but leave to dry and then re-varnish area
While applying, look for surface bubbles and even them out immediately
Apply 1-2 thin coats, allowing at least three hours dry time between coats
If you require more than two layers, first use Gloss Varnish as a base layer and build to your desired thickness, then apply Satin Varnish as your top coat

How not to use it

Do not shake or vigorously over-brush as this can result in surface bubbles and a foggy, hazy look when dry
Don't apply with a roller or sponge brush
Do not thin with water
Don't apply in one thick coat, but several thin coats, to avoid brush marks, drips and cloudiness
Don't go back over areas you have already done, as this can cause clouding
Don't attempt to remove once applied
Do not use with any non-acrylic media